Width of Mini Digger: Common Widths and Access Guide

Common Mini Digger Widths

The width of a mini digger varies by size class, and knowing the common widths makes access planning much easier. This guide summarizes the typical widths and how to use them.

Typical Widths by Class

• Micro diggers: about 0.7 to 0.95 meters.
• 1 to 1.5 ton machines: about 0.9 to 1.2 meters.
• 1.5 to 2 ton machines: about 1.1 to 1.4 meters.
• 2.5 to 3.5 ton machines: about 1.5 to 1.9 meters.

Use Track Width for Access

Always use track width, the overall width across both tracks, when measuring gates and trailers. Chassis width is narrower and misleading.

Add a Safety Margin

Add at least 5 to 10 cm to your measured opening for track sag, attachments, and maneuverability.

Common Access Scenarios

• Garden gates: choose under 1 meter wide.
• Standard driveways: 1 to 1.4 meters usually fits.
• Open sites: wider machines are fine and more stable.

Frequently Asked Questions

What width fits a standard garden gate?

Machines under 1 meter usually fit, but measure the actual opening first.

Is wider always better?

No. Wider machines are more stable but harder to access and transport.

Choose the Right Width

Small Excavator Supplier publishes track width for every model. Contact us at sales@mexcavator.com or call +86 13371211337.